• Beige
  RAL 1001
• Colza yellow
  RAL 1021
• Pastel orange
  RAL 2003
• Flame red
  RAL 3000
• Cobalt blue
  RAL 5013
• Distant blue
  RAL 5023
• Leaf green
  RAL 6002
• Yellow green
  RAL 6018
• Anthracite grey
  RAL 7016
• Light grey
  RAL 7035
• Terra brown
  RAL 8028
• Jet black
  RAL 9005
• White aluminium
  RAL9006
• Pure white
  RAL 9010

Information: A large number of further colors of the RAL-system or other color systems are possible.

• Classic red
• Missouri green
• Royal blue
• Cosmos black
• Silver grey
• Nature
• Autumn yellow

• Stone grey
• Oxide green
• Sunshine yellow
• Chilli red
• Anthracite
• Royal blue

• Blue
• Yellow
• Red
• Green
• Grey
• Violet

Note: Other colors are available on request.

• Climbing wall rectangular
  
  
  
• Climbing wall triangular
  
  
  
• Hand over hand ladder
  
  
  
• Lying net
  
  
  
• Slide
  
  
  
• Climbing rope, internal
  
  
  
• Climbing rope, external
  
  
  
• Climbing ladder, internal
  
  
  
• Hammock swing
  
  
  
• Jungle bridge
  
  
  
• V-bridge
  
  
  
• Loop bridge
  
  
  
• Bouncing bridge
  
  
  
• Catwalk bridge
  
  
  
• Rung bridge
  
  
  
• Ropeway
  
  
  
• Climbing net
  
  
  
• Hand over hand loop rope
  
  
  
• colorballs
  
  
  

smb Skyclimber® variant 3 
No. 3449904
Framework unit with additional elements, size: 8.56 x 10.48 m, height 5.0 m;
consisting of:

1x smb Skyclimber® basic unit
No. 3449001
Framework unit with dimensions: Ø 5.86 m, height 5.0 m; Required impact area: Ø 8.86 m;
Steel-tube framework made of Ø 60.3 mm steel tubes, protected against corrosion by spray zinc galvanizing and powder coating in a RAL color.
Hollow ball knots made of tempered steel with a diameter of 200 mm serve as connection points for the tubes and to accommodate the tension points on the space net. These are hot-dip galvanized and powder-coated in black (RAL 9005). The extremely robust polyamide (black) hollow ball cover seals the hollow ball knots after installation, protecting the tension points from weather conditions and unauthorized access.
A 6-strand Hercules rope with a diameter of 18 mm is used to construct the space net; the rope intersections are hydraulically crimped using smb aluminum ball knots or smb aluminum T-clamps.
All ropes feature a durable, UV-resistant polyamide or polyester sheath. The space net is tensioned into the tubular framework using our SECUCOPE tensioning system, which makes installation and maintenance easy and allows multiple rope strands to be retensioned using a single tensioning point. This closed tensioning system completely eliminates the need for shackle and eyelet connections.

2x smb Climbing plate triangular
No. 3449006
Made from CNC-machined 13 mm thick HPL (High-Pressure Laminate) with excellent weather and UV resistance. Plate dimensions approx. 1530 x 2340 mm (WxH); includes 9 climbing holds mounted with zinc-plated screws and lock nuts, with the nuts covered by plastic protective caps. The climbing holds are manufactured using the patented EPS system, which prevents the hold or parts of it from falling off if it breaks. The climbing wall is attached to the tubular frame using 8 screw-on smb aluminum tube clamps, which are additionally powder-coated in RAL 9005, deep black. An additional horizontal framework tube for the lower attachment of the climbing wall is included in the scope of delivery.

Important:
When installing the climbing plate, the anchor frame must also be secured with ground anchors. These are included with the climbing plate.

A wide range of colors is available for the climbing plate and climbing holds, as shown in the smb ColorCard for rope play equipment.

2x smb Lying net
No. 3449007
Made from 6-strand Hercules rope, Ø 16 mm, with a polyamide or polyester sheath.
Dimensions: approx. 1140 x 860 mm (including sag), mesh size approx. 280 x 290 mm;
Connection to the space net using smb aluminum T-clamps, connections at rope intersection points using smb stainless steel wire rope clamps.

1x smb Climbing rope, internal
No. 3449008
Made from 6-strand Hercules rope, Ø 18 mm, with a polyamide or polyester sheath. The rope length from the play surface is approx. 2700 mm; 7 cylindrical climbing aids, Ø 60 mm, made of black plastic, are threaded onto the climbing rope and secured to it with screws.
The attachment to the framework is made using a screw-on smb aluminum tube clamp, which is additionally powder-coated in RAL 9005, deep black. The lower attachment is made via a hinged screw connection to the anchor frame.

1x smb Climbing net
No. 3449012
Made from 6-strand Hercules rope, Ø 16 mm, with a polyamide or polyester sheath.
The net measures approx. 1700 x 2800 mm and provides an additional climbing option on the outside of the climbing frame. The rope intersections are connected using smb stainless steel wire rope clamps; the mesh size is approx. 280 x 300 mm.
The mounting is achieved using 26 ROWOCON sleeves secured in the framework tubes, with no exposed screw connections. An additional horizontal framework tube for the lower connection of the mesh is included in the scope of delivery.

1x smb Climbing ladder, internal
No. 3449013
Rope ladder with 7 cross ropes serving as rungs.
Made of Hercules rope, Ø 18 mm, length from play surface approx. 2500 mm, vertical spacing of the rungs approx. 330 mm. The cross ropes are available in various lengths from 265 to 580 mm, with both ends of the ladder tapering toward the center. The rungs are connected to the two vertical ropes using proven, hydraulically crimped aluminum T-clamps. The upper connection to the crossbar of the unit is made using two smb tube clamps included in the delivery; the lower connection is secured to the anchor frame with screws.

1x smb Hammock swing (post and attachments including)
No. 3449014 
Length between spacers approx. 1900 mm,
Total length from center of tube bend to center of support post approx. 2900 mm, width 650 mm;
Includes end fasteners and special accessories for the basic unit, such as 1 tube bend (Ø 60.3 mm) for hammock mounting and 2 smb tube clamps for connecting the tube bend to the framework tubes.
Steel tube support post, Ø 108 mm, with a mount for the hammock, attachment height 1050 mm, total height of the post above the play surface: approx. 1160 mm.
Permanently corrosion-protected via hot-dip galvanizing and powder coating in a RAL color.
The hammock net is made of Hercules rope Ø 16 mm with a mesh size approx. 125 x 125 mm, rope connections with smb stainless steel wire rope clamps or aluminum T-clamps.
Double-sided, ball-bearing suspension made of V2A stainless steel; spacers made of spray zinc galvanized and powder-coated steel tube, Ø 60.3 mm.

1x smb V-bridge
consisting of:

1x smb V-bridge (first meter)
No. 3449017
Without support structure;
V-shaped rope net bridge made of six-strand Hercules rope, Ø 16 mm;
railing height approx. 850 mm, width: starting at 90 mm and increasing to 800 mm (distance between handrail ropes). Distance between vertical ropes: min. 260 mm; side nets connected using smb stainless steel wire rope clamps; connections from the side nets to the handrail ropes using aluminum T-clamps.
Includes special accessories for the basic unit, such as 1 tube bend Ø 60.3 mm for bridge mounting and 4 smb tube clamps for attaching the tube bend and the handrail cables to the framework tubes. The tube bend not only serves as a mounting point for the V-bridge but also provides an entry aid from the bridge to the space net.

2x smb V-bridge (each following meter)
No. 34490170
Same design as the “first meter” model, but without end fittings and special accessories.

1x smb V-bridge entry post
No. 3449018
H-shaped support structure made of Ø 108 mm steel tubing with 2 cross tubes Ø 60.3 mm;
permanently corrosion protected by spray zinc galvanizing galvanizing and powder coating in a RAL color. Entry height: 400 mm, post height above play surface: approx. 1350 mm (for bridge lengths of 5 m or more: 500 / 1450 mm), total width: approx. 900 mm.

1x smb Hand over hand ladder
consisting of:

1x smb Hand over hand ladder (first meter)
No. 3449024
Without support structure;
The rope ladder consists of two 6-strand Hercules ropes (16 mm in diameter) running parallel to each other at a distance of 300 mm, with wooden rungs threaded onto them at intervals of approx. 300 mm and secured to the ropes with screws. The wooden rungs are made of black locust wood, with a diameter of 40 mm and a length of 360 mm.
The rope ladder is secured on both sides using a hinged fork/eye bolt combination, which is attached to two framework tubes on the equipment side using smb tube clamps; the necessary tube clamps are included. The other end of the rope ladder is also hinged to an additional H-post.

2x smb Hand over hand ladder (each following meter)
No. 34490240 
Same design as the “first meter” model, but without end fittings and special accessories.

1x smb Hand over hand ladder entry post
No. 3449025
H-shaped support structure made of Ø 108 mm steel tubes with 2 cross tubes (Ø 60.3 mm);
permanently corrosion protected by spray zinc galvanizing and powder coating in a RAL color.
Attachment height of the ladder: 2000 mm, post height above play surface: approx. 2100 mm, total width: approx. 700 mm.

1x smb Anchor frame
No. 3449201
The anchor frame is constructed from 70x70 mm square tubes, to which 10 vertical pipe fittings made from Ø 60.3 mm round tubing are welded; the individual elements are assembled using a plug-in system and bolted together; the anchor frame is placed 470 mm deep into solid ground, aligned, and backfilled with fall protection material;
The vertical pipe connectors allow for easy and precise installation of the hollow ball knots and, consequently, the tubular framework. With the exception of a few additional components, no foundations are required. The anchor frame is fully hot-dip galvanized, ensuring long-lasting corrosion protection.

A wide range of colors is available for the ropes and steel components (for aluminum ball knots at an additional charge) in accordance with the smb ColorCard for rope play equipment.