Skyclimber® variant 2
No. 3449903
| Unit space area | 10.36 x 6.29 m |
| Safety space area | 13.87 x 9.42 m |
| Height of unit | 5.00 m |
| Age range | 4+ |
| Number of users | 42 |
| Free fall height | 2.60 m |
| Heaviest component | 190 kg |
| Total weight | 1420 kg |
| Assembly time | 8.25 hours |
| Installers | 3 persons |
| Foundations | |
| Basic unit | anchor frame |
| Additional elements | 3 (1.00 m³ total quantity of concrete) |
Skyclimber® variant 2 consisting of the following individual components:
1 Basic unit
1 Hammock swing
1 Climbing wall rectangular
2 Climbing wall triangular
1 Slide, curved
The stainless steel slide is curved by 54° so that the slide becomes a "highlight". The slide can be left or right curved.
Play value and experience
The Skyclimber® variant 2 expands the basic unit into a multi layered play and movement space at height and offers a wide range of physical and social play opportunities.
The three dimensional rope structure invites children to climb, hang, balance and find their own routes through the net while continuously training strength, coordination and spatial awareness.
The hammock swing creates a calm counterpoint within the structure and allows sitting, lying and gentle swinging so that active movement and moments of rest can alternate naturally and participation is possible at different activity levels.
The rectangular climbing wall adds a clear planar climbing task that promotes grip strength, sure footedness and route planning, while the two triangular climbing plates open up new diagonal and lateral pathways and support varied body positions and crossing movements within the structure.
The spiral slide provides a dynamic change of movement and a motivating descent that repeatedly draws children back up into the climbing space and strengthens orientation between ascent and descent.
Different heights, speeds and levels of difficulty encourage individual exploration as well as cooperative play, where children coordinate, wait, support each other and invent their own movement sequences.
In this way the unit combines climbing, sliding, swinging and resting into a diverse play environment that sustainably supports motor development, body control, communication and creative use of space.
Popular colors for steel parts
Beige
RAL 1001
Colza yellow
RAL 1021
Pastel orange
RAL 2003
Flame red
RAL 3000
Cobalt blue
RAL 5013
Distant blue
RAL 5023
Leaf green
RAL 6002
Yellow green
RAL 6018
Anthracite grey
RAL 7016
Light grey
RAL 7035
Terra brown
RAL 8028
Jet black
RAL 9005
White aluminium
RAL9006
Pure white
RAL 9010
Information: A large number of further colors of the RAL-system or other color systems are possible.
Selectable colors for ropes
Classic red
Missouri green
Royal blue
Cosmos black
Silver grey
Nature
Autumn yellow
Selectable colors for climbing walls
Stone grey
Oxide green
Sunshine yellow
Chilli red
Anthracite
Royal blue
Selectable colors for climbing holds
Blue
Yellow
Red
Green
Grey
Violet
Note: Other colors are available on request.
Additional elements Skyclimber®
Climbing wall rectangular
Climbing wall triangular
Hand over hand ladder
Lying net
Slide
Climbing rope, internal
Climbing rope, external
Climbing ladder, internal
Hammock swing
Jungle bridge
V-bridge
Loop bridge
Bouncing bridge
Catwalk bridge
Rung bridge
Ropeway
Climbing net
Hand over hand loop rope
colorballs
Tender specification Skyclimber® variant 2
smb Skyclimber® variant 2
No. 3449903
Framework unit with additional elements, size: 6.28 x 10.36 m (right curved) or 7.61 x 8.54 m (left curved), height 5.0 m;
consisting of:
1x smb Skyclimber® basic unit
No. 3449001
Framework unit with dimensions: Ø 5.86 m, height 5.0 m; Required impact area: Ø 8.86 m;
Steel-tube framework made of Ø 60.3 mm steel tubes, protected against corrosion by spray zinc galvanizing and powder coating in a RAL color.
Hollow ball knots made of tempered steel with a diameter of 200 mm serve as connection points for the tubes and to accommodate the tension points on the space net. These are hot-dip galvanized and powder-coated in black (RAL 9005). The extremely robust polyamide (black) hollow ball cover seals the hollow ball knots after installation, protecting the tension points from weather conditions and unauthorized access.
A 6-strand Hercules rope with a diameter of 18 mm is used to construct the space net; the rope intersections are hydraulically crimped using smb aluminum ball knots or smb aluminum T-clamps.
All ropes feature a durable, UV-resistant polyamide or polyester sheath. The space net is tensioned into the tubular framework using our SECUCOPE tensioning system, which makes installation and maintenance easy and allows multiple rope strands to be retensioned using a single tensioning point. This closed tensioning system completely eliminates the need for shackle and eyelet connections.
1x smb Climbing plate rectangular
No. 3449005
Made from CNC-machined 13 mm thick HPL (High-Pressure Laminate) with excellent weather and UV resistance. Plate dimensions approx. 1620 x 2700 mm (WxH); includes 24 climbing holds mounted with zinc-plated screws and lock nuts, with the nuts covered by plastic protective caps. The climbing holds are manufactured using the patented EPS system, which prevents the hold or parts of it from falling off if it breaks. The climbing wall is attached to the tubular frame using 12 screw-on smb aluminum tube clamps, which are additionally powder-coated in RAL 9005, deep black. An additional horizontal framework tube for the lower attachment of the climbing wall is included in the scope of delivery.
Important:
When installing the climbing plate, the anchor frame must also be secured with ground anchors. These are included with the climbing plate.
A wide range of colors is available for the climbing plate and climbing holds, as shown in the smb ColorCard for rope play equipment.
2x smb Climbing plate triangular
No. 3449006
Made from CNC-machined 13 mm thick HPL (High-Pressure Laminate) with excellent weather and UV resistance. Plate dimensions approx. 1530 x 2340 mm (WxH); includes 9 climbing holds mounted with zinc-plated screws and lock nuts, with the nuts covered by plastic protective caps. The climbing holds are manufactured using the patented EPS system, which prevents the hold or parts of it from falling off if it breaks. The climbing wall is attached to the tubular frame using 8 screw-on smb aluminum tube clamps, which are additionally powder-coated in RAL 9005, deep black. An additional horizontal framework tube for the lower attachment of the climbing wall is included in the scope of delivery.
Important:
When installing the climbing plate, the anchor frame must also be secured with ground anchors. These are included with the climbing plate.
A wide range of colors is available for the climbing plate and climbing holds, as shown in the smb ColorCard for rope play equipment.
1x smb Stainless steel slide, 54° right- or left curved
No. 3449010
Slide with a 54° angle, left- or right-handed, with a mounting height of 2430 mm; slide design featuring raised side panels in the upper section and a center support made of a stainless steel tube. The scope of delivery includes two fall protection ropes that are mounted on the sides between the slide entrance and the framework tubes. The pre-assembled entry membrane made of PUR material, which is installed on the net structure, provides a safe transition from the space net to the slide entry area. To install the slide, two concrete foundations must be constructed for the center support and the slide exit.
1x smb Hammock swing (post and attachments including)
No. 3449014
Length between spacers approx. 1900 mm,
Total length from center of tube bend to center of support post approx. 2900 mm, width 650 mm;
Includes end fasteners and special accessories for the basic unit, such as 1 tube bend (Ø 60.3 mm) for hammock mounting and 2 smb tube clamps for connecting the tube bend to the framework tubes.
Steel tube support post, Ø 108 mm, with a mount for the hammock, attachment height 1050 mm, total height of the post above the play surface: approx. 1160 mm.
Permanently corrosion-protected via hot-dip galvanizing and powder coating in a RAL color.
The hammock net is made of Hercules rope Ø 16 mm with a mesh size approx. 125 x 125 mm, rope connections with smb stainless steel wire rope clamps or aluminum T-clamps.
Double-sided, ball-bearing suspension made of V2A stainless steel; spacers made of spray zinc galvanized and powder-coated steel tube, Ø 60.3 mm.
1x smb Anchor frame
No. 3449201
The anchor frame is constructed from 70x70 mm square tubes, to which 10 vertical pipe fittings made from Ø 60.3 mm round tubing are welded; the individual elements are assembled using a plug-in system and bolted together; the anchor frame is placed 470 mm deep into solid ground, aligned, and backfilled with fall protection material;
The vertical pipe connectors allow for easy and precise installation of the hollow ball knots and, consequently, the tubular framework. With the exception of a few additional components, no foundations are required. The anchor frame is fully hot-dip galvanized, ensuring long-lasting corrosion protection.
A wide range of colors is available for the ropes and steel components (for aluminum ball knots at an additional charge) in accordance with the smb ColorCard for rope play equipment.
Download area