citytor® compact
No. 7040038 (Goal) + No. 7040024 (Ground anchor)
| Unit space area | 1.17 x 0.60 m |
| Height of unit | 0.60 m |
| Mesh size | |
| Side | 38 x 130 mm |
| Back wall | 39 x 125 mm |
| Roof | 36.7 x 114 mm |
| Heaviest component | 51 kg |
| Total weight | 62 kg |
| Assembly time | 0.50 hours |
| Installation personnel | 1 person |
| Foundations | 2x 0.50 x 0.40 x 0.50 m |
citytor® compact consists of:
1x Football goal citytor® compact (No. 7040038)
1x Set of Ground anchor (No. 7040024), for one goal
Our goals are hard to beat in terms of quality and noise reduction.
The extremely sturdy tubular steel frame is galvanized against corrosion and then powder coated, so you can match the color of the goal with your unique project.
For the nets, we use 8 mm Hercules rope.
The smb elliptical nodes connect the rope crossing points and the smb ROWOCON® sleeves ensure a secure connection between the frame and the net.
The goal is bolted to the ground using the quick&easy ground anchors. The screw connections used for fasten-ing are invisible and protected in the tubular frame!
Important note: With the current height of 0.60 m, there are no requirements for fall protection, so any surface is acceptable.
Popular colors for steel parts
Beige
RAL 1001
Colza yellow
RAL 1021
Pastel orange
RAL 2003
Flame red
RAL 3000
Cobalt blue
RAL 5013
Distant blue
RAL 5023
Leaf green
RAL 6002
Yellow green
RAL 6018
Anthracite grey
RAL 7016
Light grey
RAL 7035
Terra brown
RAL 8028
Jet black
RAL 9005
White aluminium
RAL9006
Pure white
RAL 9010
Information: A large number of further colors of the RAL-system or other color systems are possible.
Selectable colors for ropes
Classic red
Cosmos black
Silver grey
Information: More colors on request.
Selectable colors for elliptical nodes
White
Black
Beige
Grey
Information: More colors are available on request.
Tender specification citiytor® compact
citytor® compact
No. 7040038
consisting of:
1x citytor compact
No. 7040038
Football goal with external dimensions of 1.17 x 0.60 x 0.60 m (WxHxD) and a clear goal opening of 1.0 x 0.52 m.
Stable, fully welded frame construction made of steel tubes; front goal frame made of steel tube Ø 82.5 x 3.2 mm, rear and side frames made of steel tube Ø 60.3 x 2.9 mm;
Corrosion protection provided by spray galvanisation followed by powder coating in RAL colour.
Goal nets made from 4-strand Hercules rope, Ø 8 mm, with high steel content and a polypropylene yarn coating, inner mesh size approx. 31 x 117 mm (WxH), rope intersections connected using smb elliptical knots.
The nets are securely screwed into the smb-ROWOCON® sleeves fixed in the goal frame using stainless steel grub screws. The grub screws are secured with a polyamide coating to prevent them from coming loose accidentally, yet still allow the individual goal nets to be effortlessly replaced on site.
The goal is bolted to the ground using two ground anchors that are set in concrete; required foundations: 2x 0.4 x 0.5 x 0.5 m (WxHxD); the bolts used for fastening are unseen and protected in the tubular frame.
A wide range of colors is available for the steel parts, ropes and elliptical knots in accordance with the smb ColorCard for urban sports equipment.
1x complete set ground anchor "quick & easy" for citytor® compact
No. 7040024
1 complete set (2 ground anchors) for installing a citytor® compact; includes all necessary fasteners.
The ground anchors are installed level with the future playing surface, enabling easy foundation construction and simple installation of the goal after the flooring has been laid.
Movable mountings for the screw connections (sliding blocks) inside the ground anchors compensate for any dimensional inaccuracies that may arise during the construction of the foundations.
Hot-dip galvanising of the ground anchors provides long-term corrosion protection and thus contributes to the long-lasting stability of the goal.
Download area